Get to know our products
Contact

(+48) 880 524 105
injection@yetico.com

(+48) 600 928 638
ksztaltki@yetico.com

(+48) 880 559 163
webox@yetico.com

Styrodur 3000 CS

Schaller_Styrodur_27.11.201417311-neu_square

Styrodur is the generic name for extruded (XPS) boards, produced by the renowned company BASF. Styrodur is characterised by improved insulation properties, low water absorption, and, most of all, excellent weight resistance. XPS boards maintain the same thermal conductivity rate for all thicknesses.

  • Lambda: 0,033 [W/m . K]
  • Accesible sizes: 1265 x 615 [mm]
  • Thickness: 20, 30, 50, 60, 80, 100, 120, 140, 160, 180, 200, 240
  • Edges: smooth

Application

  • thermal insulation of surfaces under working load below 9 t/m2
  • thermal insulation of foundation walls
  • thermal insulation floors at ground level
  • thermal insulation of car parks
  • thermal insulation for flat and sloping roofs and ceilings
Schaller_Styrodur_27.11.201417311-neu_square

Specification
Standard code
EN 13164:2012+A1:2015
Declared thermal conductivity rate
[-]
≤ 0,033 [W/(m . K)]
Compressive strength at 10 % deformation
CS(10/Y)
≥ 300 [kPa]
Water absorption level under total, long-term immersion
WL(T)
≤ 0,7 [%]
Classes of dimensional stability under constant laboratory conditions1
DS(70,90)
≤ 5 [%]
Levels of dimensional stability under constant temperature and humidity conditions2
DLT(2)
≤ 5 [%]
Water absorption level under long-term diffusion
WD(V)3
≤ 3 [%]
Raction to fire
Euroclass
E
1measured in temperature of 70oC for the duration of 48 hours
2 measured in temperature of 70oC for the duration of 48 hours, under 40 kPa load
image

Let's talk
about sales

Contact for investors, contractors, architects, and designers.

Sales to investors
Contact us>

Contact for distributors of building materials. Information about where to buy products.

Sales to distributors
Contact us>

Construction
calculators

Use our simple construction calculators. They will advise on how much material to purchase and help select the type and thickness of EPS boards that will provide the required U coefficient.

Use calculators