Aqua Passive EPS-P 100
AQUA PASSIVE EPS-P 100 boards are characterised by a very good thermal conductivity rate. Low lambda and reduced water absorption make the boards ideal for thermal insulation of foundations. Recommended for energy-efficient and passive construction.
- Lambda: 0,031 [W/m . K]
- Compressive stress: CS(10) â„ 100 [kPa]
- Accesible sizes: 1230 x 615 [mm]
- Thickness: from 50 [mm], in increments of 10 [mm]
- Edges: milled overlapping edges (trim size â 15 [mm])
Application
- Thermal insulation of surfaces under working load below 3,0 t/m2
- Thermal insulation of foundation walls
- Thermal insulation of structural ceilings and floors in humid areas
- Thermal insulation of unused roofs
- Thermal insulation of green roofs
Specification
Standard code
EN 13163:2012+A1:2015
Product code EPS-EN
13163-T1-L3-W2-Sb2-P5-BS150-CS(10)100-DS(N)2-DS(70,90)1-DLT(1)5-WL(T)2-WD(V)3
Thickness
T1
± 1 [mm]
Length
L3
± 3 [mm]
Width
W2
± 2 [mm]
Rectangularity over the length and width
Sb2
± 2/1000 [mm/mm]
Flatness
P5
5 [mm]
Flexural strength levels
BS150
â„ 150 [kPa]
Compressive strength at 10 % deformation
CS(10)100
â„ 100 [kPa]
Classes of dimensional stability under constant laboratory conditions1
DS(N)2
± 0,2 [%]
Levels of dimensional stability under constant temperature and humidity conditions2
DS(70,90)1
†1 [%]
Deformation levels under specified compressive load and temperature3
DLT(1)5
†5 [%]
Water absorption level under total, long-term immersion - examination performed according to PN-EN 12087, item 7.2.2, method 2A â i.e. a sample immersed completely for a trial period of 28 days
WL(T)2
†2 [%]
Water absorption level under long-term diffusion
WD(V)3
†3 [%]
Declared thermal conductivity rate
[-]
†0,031 [W/(m . K)]
Reaction to fire
Euroclass
E
1 measured in 23oC, 50% relative moisture
2 measured in temperature of 70oC for the duration of 48 hours
3 measured in temperature of 80oC for the duration of 48 hours, under 20 kPa load
2 measured in temperature of 70oC for the duration of 48 hours
3 measured in temperature of 80oC for the duration of 48 hours, under 20 kPa load
Let's talk
about sales
Contact for investors, contractors, architects, and designers.
Sales to investors
Contact us>
Contact for distributors of building materials. Information about where to buy products.
Sales to distributors
Contact us>
Construction
calculators
Use our simple construction calculators. They will advise on how much material to purchase and help select the type and thickness of EPS boards that will provide the required U coefficient.
Use calculators
