Beta Podłoga
Thermal insulation boards for floors and roofs carrying normal loads – up to 2.1 t/m2. BETA PODŁOGA boards are suitable for insulating floors and roofs in residential, industrial and public buildings.
- Lambda: 0,038 [W/m.K]
- Compressive stress: CS(10) ≥ 70 [kPa]
- Accesible sizes: 1000 x 500 [mm]
- Thickness: from 10 [mm], in increments of 10 [mm]
- Edges: smooth or milled overlapping edges (trim size – 15 [mm])
Application
- thermal insulation of floors and roofs under working load below 2,1 t/m2
- thermal insulation of floors on the ground in housing, public or industrial development, under little loads
- thermal insulation of floors in public utility development
- thermal insulation of full flat roofs
- thermal insulation of external and internal roofs
- thermal insulation of balconies and terraces
- thermal insulation of floors in underfloor heating systems
Specification
Standard code
EN 13163:2012+A1:2015
Products code EPS-EN
13163-T1-L2-W2-Sb2-P5-BS115-CS(10)70-DS(N)2-DS (70,-)2-TR100
Thickness
T1
± 1 [mm]
Length
L2
± 2 [mm]
Width
W2
± 2 [mm]
Rectangularity over the length and width
Sb2
± 2/1000 [mm/mm]
Flatness
P5
5 [mm]
Flexural strength levels
BS115
≥ 115 [kPa]
Compressive strength at 10 % deformation
CS(10)70
≥ 70 [kPa]
Classes of dimensional stability under constant laboratory conditions1
DS(N)2
± 0,2 [%]
Levels of dimensional stability under constant temperature and humidity conditions2
DS(70,-)2
≤ 2 [%]
Tensile strength perpendicular to faces
TR100
≥ 100 [kPa]
Declared thermal conductivity rate
[-]
≤ 0,038 [W/(m.K)]
Reaction to fire
Euroclass
E
1 measured in 23oC, 50% relative moisture
2 measured in temperature of 70oC for the duration of 48 hours
2 measured in temperature of 70oC for the duration of 48 hours
Let's talk
about sales
Contact for investors, contractors, architects, and designers.
Sales to investors
Contact us>
Contact for distributors of building materials. Information about where to buy products.
Sales to distributors
Contact us>
Construction
calculators
Use our simple construction calculators. They will advise on how much material to purchase and help select the type and thickness of EPS boards that will provide the required U coefficient.
Use calculators