Get to know our products
Contact

(+48) 880 524 105
injection@yetico.com

(+48) 600 928 638
ksztaltki@yetico.com

(+48) 880 559 163
webox@yetico.com

EPS 200

dach_prosta_5p_cien

White EPS boards for thermal insulation of floors and roofs. EPS 200 boards are distinguished by their very high compressive stress – payload up to 6.0 t/m2.

  • Lambda: 0,034 [W/m.K]
  • Compressive stress: CS(10) ≥ 200 [kPa]
  • Accesible sizes: 1000 x 500 [mm]
  • Thickness: from 10 [mm], in increments of 10 [mm]
  • Edges: smooth or milled overlapping edges (trim size – 15 [mm])

Application

  • thermal insulation of floors and roofs under working load below 6,0 t/m2
  • thermal insulation of floors on the ground in housing, public or industrial development, under little loads
  • thermal insulation of floors in public utility development
  • thermal insulation of full flat roofs
  • thermal insulation of external and internal roofs
  • thermal insulation of balconies and terraces
  • thermal insulation of floors in underfloor heating systems
dach_prosta_5p_cien

Specification
Standard code
EN 13163:2012+A1:2015
Product code EPS-EN
13163-T2-L3-W3-Sb5-P10-BS250-CS(10)200-DS(N)5-DS(70,-)2-DLT(1)5
Thickness
T2
± 2 [mm]
Length
L3
± 3 [mm]
Width
W3
± 3 [mm]
Rectangularity over the length and width
Sb5
± 5/1000 [mm/mm]
Flatness
P10
10 [mm]
Flexural strength levels
BS250
≥ 250 [kPa
Compressive strength at 10 % deformation
CS(10)200
≥ 200 [kPa]
Classes of dimensional stability under constant laboratory conditions1
DS(N)5
± 0,5 [%]
Levels of dimensional stability under constant temperature and humidity conditions2
DS(70,-)2
≤ 2 [%]
Deformation levels under specified compressive load and temperature3
DLT(1)5
≤ 5 [%]
Declared thermal conductivity rate
[-]
≤ 0,034 [W/(m.K)]
Reaction to fire
Euroclass
E
1 measured in 23oC, 50% relative moisture
2 measured in temperature of 70oC for the duration of 48 hours
3 measured in temperature of 80oC for the duration of 48 hours under 20 kPa load
Download
datascheet_EPS_200
Data sheet
11-DoP-2021-2 EPS 200.pl.en
Declaration of performance
image

Let's talk
about sales

Contact for investors, contractors, architects, and designers.

Sales to investors
Contact us>

Contact for distributors of building materials. Information about where to buy products.

Sales to distributors
Contact us>

Construction
calculators

Use our simple construction calculators. They will advise on how much material to purchase and help select the type and thickness of EPS boards that will provide the required U coefficient.

Use calculators